 |
|
|
|
 |
|
|
||
|
 |
|
|
||
 |
||
|
||
 |
||
|
||
 |
||
|
||
 |
||
|
||
 |
||
|
||
 |
||
|
||
 |
||
|
||
 |
||
|
||
|
|
 |
L-Mesh™ composite mesh is a laminate of polyester knitted mesh and expanded polytetrafluoroethylene (ePTFE) microporous film. The ePTFE film is bonded to the mesh using a polypropylene thermoplastic adhesive. The result is a flexible and resilient sheet with a textured mesh surface on one side and a smooth microporous film on the other side.
The mesh side has the classic characteristics of promoting good tissue ingrowth and adhesion, while the smooth film side discourages tissue ingrowth and adhesion. The microporous film has pores in the size range of about 2 to 4um and thickness of about 25um.
All L-Mesh™ composite mesh products are made to order. The dimensions of the sheets are 35cm long by 30cm wide. Any grade of polyester mesh can be used. We have mesh fabrics made with multifilament and monofilament yarns to meet your specific needs. The choice is yours.
COMPOSITE MESH FABRICS CANNOT BE GAMMA IRRADIATED! USE ONLY AN APPROVED METHOD FOR STERILIZATION, SUCH AS ETHYLENE OXIDE (EtO) OR STEAM AUTOCLAVE.
COMPOSITE MESH FABRICS CONVERTED INTO FINISHED MEDICAL DEVICES MUST UNDERGO A FINAL CLEANING STEP THROUGH A CUSTOMER APPROVED PROCESS.
ISO-10993 Biocompatibility results for L-Mesh™ components are available to our customers upon request.